$1,195.00
The AfterBurner 16″ Axial Fan is similar to our JetBlast fan except this one is socially-unacceptable with its extreme airflow and louder noise level. This fan is meant for use where extreme concentrated airflow is required, like smoke evacuations, drying applications, cooling vehicles on a dyno, and such. This fan is louder so only use it where noise is not a concern, or if your mother-in-law is trying to talk to you. We call it the Afterburner because it starts to a middle speed for a few seconds then ramps up to warp speed like a jet’s afterburner. A serious fan for a serious cooling need.
The AfterBurner 16″ Axial Fan is similar to our JetBlast fan except this one is socially-unacceptable with its extreme airflow and louder noise level. This fan is meant for use where extreme concentrated airflow is required, like smoke evacuations, drying applications, cooling vehicles on a dyno, and such. This fan is louder so only use it where noise is not a concern, or if your mother-in-law is trying to talk to you. We call it the Afterburner because it starts to a middle speed for a few seconds then ramps up to warp speed like a jet’s afterburner. A serious fan for a serious cooling need.
| Weight | 68 lbs |
|---|---|
| Airflow | 9,000 CFM |
| Motor | 1200 Watts / 1.6 HP /Direct Drive / Totally Enclosed / 115 Volt / 9.7 Amps |
| Diameter | 16” Diameter / Can Use a Standard 16” Tube |
| Controls | Single Speed |
| Mobility | two wheels and two pads |
| Power Cord | 115 Volt / 12" Cord |
| Tilt | Down 45 degrees and straight up |
| Drive | Direct |
| Clearance | 16” Optional swing arm mount for dock doors |
| Blade | 7" steel / Aggressive Pitch / 3300 RPM |
| Optional Swing Arm: | Additional ($245), No |
