fbpx

column1

Why a conical-shaped airflow?

2021-02-16T15:47:35+00:00July 22nd, 2020|

We worked long and hard on our patent pending industrial fan design to achieve the conical airflow. This conical shape not only provides a consistent airflow distribution but also promotes airflow expansion and even cooling to a wider area below [...]

Can I hard wire the fan?

2021-02-16T15:48:03+00:00July 22nd, 2020|

Yes, you can. The fans can be hard wired per electrical code. Single speed industrial fans must be wired into a switched circuit and cannot be controlled by a variable speed controller.

What voltage is required?

2021-02-16T15:48:29+00:00July 22nd, 2020|

Our industrial fans run on 120 Volt, 60 Hz, single phase, but they can be wired for 220 Volt if needed. Each fan includes a 15’ power cord with a 3-prong plug. You can use a high quality 14- or [...]

Why belt-drive?

2021-02-16T15:50:18+00:00July 22nd, 2020|

Belt-drive fans are quiet, reliable and offer an affordable option for industrial fans. The belt absorbs the vibration created by a motor, and does not transfer it to the blade assembly. Belt-drive industrial fans have increased motor longevity because of [...]

Why a shrouded fan?

2021-02-16T15:50:58+00:00July 22nd, 2020|

The shroud reduces losses in thrust from the tips of the industrial fan blades. Varying the cross-section of the shroud allows Super Duty Industrial Fans to advantageously affect the velocity and pressure of the airflow according to Bernoulli’s principle. In [...]